Sara Sandberg 2017

Projects

www.cardmakingparadise.com

Shed Shaped Card Instructions

Step 1

Project and template designed by Sara Sandberg

Step 2

Step 4

Cut your templates out and cut the two slits shown by the solid lines on the shed base. See here for wood effect tips.

Fold the pull tab piece in half lengthways, and glue it shut. Use a bone folder or the back of a spoon to get a nice crisp fold.

While the glue is still wet, fold the pull piece at the score line and press flat, again using a bone folder or back of a spoon to get a nice crisp fold.

From the inside of the card feed the thin end of the pull piece through the small slit, the slit nearest the centre of the card.

Now feed the thicker end through the remaining slit.

Close the card so the front is showing.

Step 3

Step 5

Step 6

Take the back of the door piece, and stick the cross bars to it.

Step 7

Turn the door over so the back of it faces up  Make sure the thin end of the tab is pulled through as far as it will go and stick it to the door as shown.

Step 8

Stick your hinges and knob to the front door piece, and stick it on top of the back of the door as shown.

{Next steps, click here!}

Shed Shaped Card Instructions